Techman Systems Private Limited

Features:

• Convoluted diaphragm design to improve regulation precision and cycle life
• Applicable to corrosive or toxic gases With special cleaning and packaging
• Applicable to oxygen-enriched environments
• Adjustable relief pressure
• 20 μm filter installed at the inlet

Specifications:

• Body Material SS 304, 304L
• Cap Assembly Standard Cleaning Process Standard Cleaning Process Connection 1 Size & Type 1/4 & 1/2
• In NPTF Connection 2 Size & Type 1/4 & 1/2
• In NPTF Handle Knob
• Max Temp 70 Degree
• Inlet pressure Up to 210 bar
• Outlet pressure Up to 14 bar
• Flow rate 250 LPM/800 LPM
• Sensing element Diaphragm C276 Seat Material PFA Mounting Back/Panel

Is designed for use in applications requiring constant outlet pressure even with wide variations in inlet pressure. This two-stage regulator is comparable to two single-stage regulators connected in series. The first stage is factory set to reduce the inlet pressure to 500 psig (34.4 bar). The second stage can be adjusted with the handle to achieve the required outlet pressure. This two-stage arrangement minimizes the supply-pressure effect caused by fluctuating inlet pressure, such as with a depleting gas cylinder. As inlet pressure drops below the setting of the first stage, the regulator then functions as a single-stage regulator. The first-stage pressure setting can be reduced while monitoring the pressure at the interstage port, but lower flow may result.   Specifications: Type of Regulator Double Stage Regulator Series RDS Series Body Material SS 304,304L,316,316L,Brass Cap Assembly Standard Cleaning Process Standard Cleaning Process Connection 1 Size & Type As per gas standard Connection 2 Size & Type As per standard Handle Knob Max Temp 70 Degree Inlet pressure Upto 210 Bar Outlet pressure Upto 25 Bar Flow rate 250LPM/ 800LPM Sensing element Diaphragm C276 Seat Material PFA Mounting Back/Panel

We manufacture High-Quality pressure Regulator for special Gases such as Ammonia, Chlorine Etc. We choose the Raw material according to the gas material compatibility.

Mini regulators provide a convenient and low cost method to reduce a supplied pressure to desired outlet pressure. They provide quick response and accurate pressure regulation for the most demanding industrial applications. They are generally used in a wide variety of applications where reduced pressure is highly desirable for energy conservation, safety requirements, air circuit control and instrumentation.

For space restricted applications, this product can provide a solution that does not sacrifice performance. Pressure regulators transform a fluctuating air supply to a relatively constant reduced air pressure within the operating range of the regulator itself

Features:

• Compact body provides small foot space
• Special Metal Diaphragm & Seat
• Low internal volume
• All 316L/304L SS parts including bonnet with panel mounting as standard
• Soft’ seating area perpendicular to flow stream to minimise particle damage
• Stainless steel body & Bonnet for corrosive & toxic gases

With the help of expert professionals, we are occupied in providing Hydrogen Gas Regulator. 

This is Acetylene gas regulator. Inlet Connection as per requirements.Oulet connection upto 200 kg. 

Is designed for use in applications requiring constant outlet pressure even with wide variations in inlet pressure. This two-stage regulator is comparable to two single-stage regulators connected in series. The first stage is factory set to reduce the inlet pressure to 500 psig (34.4 bar). The second stage can be adjusted with the handle to achieve the required outlet pressure. This two-stage arrangement minimizes the supply-pressure effect caused by fluctuating inlet pressure, such as with a depleting gas cylinder. As inlet pressure drops below the setting of the first stage, the regulator then functions as a single-stage regulator. The first-stage pressure setting can be reduced while monitoring the pressure at the interstage port, but lower flow may result.   Specifications: Type of Regulator Double Stage Regulator Series RDS Series Body Material SS 304,304L,316,316L,Brass Cap Assembly Standard Cleaning Process Standard Cleaning Process Connection 1 Size & Type As per gas standard Connection 2 Size & Type As per standard Handle Knob Max Temp 70 Degree Inlet pressure Upto 210 Bar Outlet pressure Upto 25 Bar Flow rate 250LPM/ 800LPM Sensing element Diaphragm C276 Seat Material PFA Mounting Back/Panel

Additional Information:

• Production Capacity: 1000/month

A line regulator, as the name implies, is installed in a gas line to provide a means to further reduce the gas line pressure prior to its end use point. A typical line regulator is supplied with an outlet gauge.

 

Specifications:
 

SPECIAL FEATURES

· Reduces Central Gas Line pressures (upstream) to lower downstream pressure

· Suitable for High Pressures up to 15bar

· For inert, reactive, flammable and oxidizing gases and gas mixtures

· Excellent and accurate Pressure control

· Designed to minimize contamination

· Low internal volume (no dead-space)

· Long service life and easy to maintain

we are introducing Food Grade Nitrogen Regulator for FMCG Industry. This Regulators are made from Barstock SS & have a Hasteally Diaphragm which dont generate moisture or react with the gas. 

we cleaned our regulator as per the industry standard for best gas purity result.

Ex-lok is the leading brand into Pressure Regulator Manufacturing in India. We serve various industries across the globe. We are continuously updating our technology in Regulator to meet new
requirements of Customer. Ex-lok regulators undergoes various testing process to ensure the proper
output & safety.

Pressure Regulator Operation Regulators reduce the pressure of a gas or liquid from a source, such as a cylinder or compressor, to a lower value needed by a device, such as an analyser.

A pressure regulator provides better resolution and control when its inlet and control range pressures closely match the pressure requirements of the fluid handling system. Resolution is the number of handle turns needed to adjust a regulator from its lowest to highest outlet pressure setting. Control is the ability of the regulator to hold a given outlet pressure set point

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 5000
• Delivery Time: 2 days

Inlet pressure upto 280 kg, Oulet upto 200 kg. Inlet Connection as per requirements.             

Features:

• Convoluted diaphragm design to improve regulation precision and cycle life
• Applicable to corrosive or toxic gases With special cleaning and packaging
• Applicable to oxygen-enriched environments
• Adjustable relief pressure
• 20 μm filter installed at the inlet

Specifications:

• Body Material SS 304, 304L
• Cap Assembly Standard Cleaning Process Standard Cleaning Process Connection 1 Size & Type 1/4 & 1/2
• In NPTF Connection 2 Size & Type 1/4 & 1/2
• In NPTF Handle Knob
• Max Temp 70 Degree
• Inlet pressure Up to 210 bar
• Outlet pressure Up to 14 bar
• Flow rate 250 LPM/800 LPM
• Sensing element Diaphragm C276 Seat Material PFA Mounting Back/Panel

Additional Information:

• Production Capacity: 100 PER DAY
• Delivery Time: 1 DAY

Single Stage Regulator for Medical Oxygen Cylinder, MOC Brass, Inlet Pressure: 0 to 150 Bar, Outlet 0 to 10 Bar, Hastealloy Diaphragm for Better Gas quality. warranty : 1 Year.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 100 per day
• Delivery Time: Within 8 days after confirm work order